JamVOX 1.52 for Windows
Release Notes
JamVOX v1.52 Release Notes Before installing software Please do not connect the JamVOX Monitor to your computer before installing JamVOX Driver and Software. - On some specific PC environments there may have been a lack of audio or audio dropouts with v1.50. This problem has been solved by returning to the audio driver of v1.11. - The upgraded GXT function of v1.50 is now compatible with GXT programs made by the previous versions v1.11 or earlier. When you use pre v1.50 GXT programs, the program uses the previous algorithm. Once you edit it, it uses the new algorithm. Any GXT program created or edited & saved in v1.5x cannot be used in v1.11 or earlier. Some minor bugs have also been fixed. -------- JamVOX v1.50 Release Notes - The effect of center extracting has been improved by enhancing the algorithm of GXT. The following parameters have been added. - "AREA" parameter: Two new curves have been added. The part panned to the center, left side or right side of the song can be extracted more widely. - Algorithm selection: Switches the sound character. - The usability of GXT has been enhanced. A new "Easy edit mode" has been added which enables you to set an instrument or a part which you want to extract, with simple steps. The steps are as follows. 1. Click [Edit] button to show the edit panel. 2. Select an instrument or a part which you want to extract from the "Instrument / Part" buttons located on the left side of the edit panel. Here are nine kinds of instruments or parts: - Guitar Solo CLASSIC - Guitar Solo MODERN - Guitar Solo METAL - Guitar Backing CLASSIC - Guitar Backing MODERN - Guitar Backing METAL - Acoustic Guitar - Bass - Vocal 3. Play a song, then find and specify the panning which you want to extract by rotating a large dial located on the right side of the edit panel. 4. If the instrument or the part cannot be extracted, try to select other "Instrument/Part" buttons. In addition, when you want to edit the settings in more detail, click [Expert] button to show the existing edit panel. Regarding the settings, please refer to "Owner's manual" in the "Help" menu. Note: GXT works by determining the sound's "stereo position" (panning) and "frequency band." This means that it won't be effective on monaural songs. Furthermore, other sounds in the same stereo position and frequency band will be cancelled as well. Also, the effect may be difficult to notice on some songs depending on how the guitar part has been mixed. - "Tempo Change" function and "Pitch Change" function have been greatly enhanced. High-definition algorithm "élastique efficient V2" by zplane.development has been integrated into the JamVOX. You can change the tempo and the pitch with no loss of quality. - Two new functions which enable you to save the settings of the "Pitch Change" function and "Tempo Change" function into each song have been added. You can change settings in the "Preferences" dialog - "Player" - "Save pitch change setting to a specific song" and "Save tempo change setting to a specific song". The default setting of "Save pitch change setting to a specific song" is set to on and the default setting of "Save tempo change setting to a specific song" is set to off. - Three high-definition reverbs: HD-ROOM, HD-CHAMBER and HD-HALL have been added. You can get the reverberation you want easily by editing parameters customized for guitar. Regarding parameter settings, please refer to "Effect Guide" in the "Help" menu. - UMPC's and Netbook's are now supported. Below is a list of models that are supported: - ASUS Eee PC 901-X - Acer Aspire One 751 - The value range of PROG.LEVEL has been expanded from “0.0 – 10.0” to “0.0 – 20.0”. This allows you to give more volume to guitar programs with clean sounds. - A new function which enables you to download Guitar/GXT programs directly via JamVOX-Online (http://www.jamvox-online.com) has been added. You can import downloaded programs by dragging-and-dropping to the JamVOX software. - The usability of keyboard shortcuts has been improved by reassigning the shortcut keys. For details, please refer to “Keyboard Shortcuts” in the “Help” menu. - A new function which enables you to open a folder containing the audio file that exists in the main list has been added. To open the folder, right-click the song name, then select "Show in Explorer" from the menu that appears. - A new function which enables you to show "Amp/Cabinet control panel" and "Effect control panel" in the single panel has been added. You can also change to the double panels as in the previous version. You can change the setting in "Preferences" dialog - "General" - "Always show the amp control panel". The default setting for this is on. Note: When using the PCs which support 1,024 x 600 or lower display resolution like UMPC’s and Netbook’s, the default setting is set to off. - A new function, which enables you to delete the “source list” or the folder from the menu has been added. To delete them, right-click the "source list" or the folder you want to delete, then select "delete" from the menu that appears. - JamVOX could not import the iTunes library located on the network drive. This problem has been fixed. - "FACTOR" parameters for the tap tempo function did not work. This problem has been fixed. - JamVOX sometimes crashed when changing the guitar programs using the foot switch. This problem has been fixed. - JamVOX crashed when launching it on some PCs. This problem has been fixed. - A blue screen problem sometimes occurred. This problem has been fixed. Various other minor bugs, display anomalies and functions have also been fixed and/or improved. -------- JamVOX v1.11 Release Notes - Some PC users running Windows may have experienced a pop/click noise problem. This problem has been improved. - The pop/click noise problem can be caused by various factors depending on computer configuration. Two new features have been added to JamVOX that can help to reduce the noise. 1. Adjustment to set process priority to high The noise may be reduced by raising the process priority of the software to high. You can adjust this setting in the "Preferences" dialog - "Hardware/Performance" - "Set process priority to high". The default setting is off. 2. Setting to limit the number of CPUs If you are using a PC that supports multi-core/multi-processor, the noise may be reduced by limiting the number of CPUs. You can make adjustments to this setting in the "Preferences" dialog - "Hardware/Performance" - "Select CPU :". NOTE: This setting only affects JamVOX. - When "Adjust for best performance" is unselected in the Windows OS settings, a dialog box appears on start-up. If you experience pop/click noise, please follow the instructions in this dialog. - The "Response" setting now supports a finer adjustment. NOTE: The previous stored setting is initialized after applying this version. If you wish to change the setting, you can adjust it in the "Preferences" dialog - "Hardware/Performance" - "Response". - Previous versions of JamVOX occasionally fail to log on to "JamVOX-Online". This problem has been fixed. - When a song starts, occasionally the pitch could drift or become inaccurate. This problem has been fixed. - At start up, the tuner sometimes showed an inaccurate guitar tuning pitch. This problem has been fixed. - A blue screen problem sometimes occurred during installation. This problem has been fixed. - "Hardware" in the "Preferences" dialog has changed its name to "Hardware/Performance". Various other minor bugs, display anomalies and functions have also been fixed and/or improved. -------- JamVOX v1.10 Release Notes - Windows Vista 64-bit is now supported. - New "Guitar Tab Search" has been added. You can search for a guitar tab of the song you want to play from GuitarInstructor.com by clicking on the eighth note icon located at the right of the "Name" shown in the main list. - A new option has been added to "Recording", which enables you to stop recording automatically at the end of a song. You can change the setting in the "Preferences" dialog - "Recording" - "Automatically stops recording at the end of a song". The default setting is on. Various other minor bugs, display anomalies and functions have also been fixed and/or improved. -------- JamVOX v1.04 Release Notes - Spanish is now supported. - You can switch the function to start JamVOX automatically to OFF/ON in the "Preferences" dialog - "General" - "Start" - "Automatically load JamVOX upon startup". - In JamVOX 1.04 for Windows, the audio format now defaults to WMA. If you wish to keep WAV or AIFF as the default audio format, you must change the settings in the "Preferences" dialog - "Recording" - "Audio Format". Various other minor bugs, display anomalies and functions have also been fixed and/or improved. -------- JamVOX v1.0.3 Release Notes - Some Windows PC had a pop/click noise problem. This problem has been improved. Various other minor bugs, display anomalies and functions have also been fixed and/or improved. Owner's Manual Addendum Requirements: Mac OS X CPU: PowerPC G4/1.5GHz or faster, or Intel CPU RAM: 1GB or larger Display: 1,024×768 - 32,000 colors or higher OS: Mac OS X 10.4 or later Windows CPU: Pentium4 2.0GHz or faster RAM: 1GB or larger Display: 1,024×768 - 16bit colors or higher OS: Windows XP SP2, Windows Vista SP1 (32-bit) or later
Download 158 M